Contact
Green, low viscosity, high strength, fast curing; Suitable for transitional or interference fit.
Packing specification: 50ml/ bottle
It is brown, sticky, can be cured at low temperature (5℃), and can be repaired under wet conditions.
Packing specification: 1.5kg/ can
Water-based weak acid rust remover, pH 6.5. Rapid penetration and dissolution of stubborn rust, easy rust removal.
Packing specification: 1L/ barrel
Grey graphite/molybdenum base, lubrication and temperature resistance of 890℃, reduce wear and noise, prevent cylinder pulling, hair drawing, scratch, bite.
Packing specification: 500g/1kg/ pot, 10kg/20kg/ barrel
Dark blue, heating fast curing, temperature resistance 580℃, pressure resistance 32MPa;
It is more suitable for nuclear power turbine and industrial turbine cylinder joint sealing.
Packing specification: 1.25kg/ can
Green, medium viscosity, high strength, solvent resistance; Suitable for clearance less than 0.25mm or transition fit.
Packing specification: 50ml/ bottle
Grey, mud shape, suitable for quick plugging and repair.
Packing specification: 1.5kg/ set
Light brown transparent liquid, form a dry protective film, can be moistureproof, anticorrosive, electrical insulation.
Packing specification: 450ml/can
Copper color, copper base, lubrication and temperature resistance of 980℃, anti-jamming, anti-rust, anti-bite; It is suitable for the pre-coating of metal connectors before assembly.
Packing specification: 500g/1kg/ can
Reddish-brown, fast curing when heated, viscous and flowable paste, temperature 510℃, resistance to a variety of high temperature fluid and chemical media erosion, high temperature conditions, the thread seal of the metal pipe thread.
Packing specification: 400g/ can
White, high viscosity paste, general purpose, high temperature resistance of 204℃, with self-lubrication; Suitable for pipe thread sealing of oil, gas, steam and other media.
Packing specification: 50ml/ bottle
Gray white, two-component, can be quickly cured after mixing, can be bonded with oil; Suitable for oil surface repair (not suitable for copper).
Packing specification: 504g/ box
White, PTFE based, lubrication and temperature resistance 320℃, lubrication, anti-jamming, wear and noise reduction, universal lubrication anti-jamming, can be used in a variety of working conditions.
Packing specification: 500g/1kg/ can
Reddish-brown, fast curing by heating, thixotropic paste, facade does not flow, temperature resistance 510℃, filling type sealing the sealing surface of each metal connection.
Package size: 700g/ can
Grey, glue stick, cut and use, 3-5 minutes to cure. Manual kneading and mixing can be with pressure plugging.
Packing specification: 114g/ piece
White, dry adhesive, maintain viscoelastic not hardening, inert to hydrogen, good air tightness, good viscosity temperature, oil immersion resistance, not swelling; Used to seal hydrogen gas in the grooves of generator end cover.
Packing specification: 2kg/ can
Immersed adhesive winding tape, immersed adhesive tape activated by hot water, can be quickly solidified by gel. Used for winding to repair pipeline leaks.
Packing specification: (width × length cm) : 5×150/7.5×300/7.5×600
Black, non-drying adhesive, maintain viscoelastic, solvent free, non-volatile, moderate viscosity, easy to glue; Used to seal hydrogen gas in the grooves of generator end cover.
Packing specification: 2kg/ can
Brown, temperature resistant 380℃, coated on the surface of the gasket, play an auxiliary sealing role; Suitable for all kinds of gasket seal.
Packing specification: 1kg/ barrel
Blue, medium viscosity, oil resistance, high elongation, good elasticity; It is suitable for plane sealing of all kinds of mechanical equipment.
Packing specification: 310ml/ piece, 125g/ tube
Gray, oil resistant and medium resistant; It is suitable for sealing the joint surface of box, axle and other mechanical parts.
Packing specification: 310ml/ piece, 125g/ tube
Black, table dry fast, residue is easy to remove, easier to disassemble; Suitable for sealing all kinds of mechanical equipment.
Packing specification: 310ml/ piece
White, dealcoholized, low modulus, neutral curing;
Suitable for insulation bonding and sealing of electrical equipment.
Packing specification: 310ml/ piece
Red, high temperature resistance 320℃, fast curing, used for vacuum sealing under negative pressure and high temperature conditions of filling seal.
Packing specification: 310ml/ piece
Transparent, medium and low viscosity, universal;
It is suitable for quick positioning and bonding of various materials.
Packing specification: 20g/ bottle
Transparent, medium viscosity, universal;
Suitable for metal, rubber, plastic, wood and other materials bonding.
Packing specification: 20g/ bottle
Power energy ®（ POWEROX ®） We have obtained iso9001:2015 quality management system certification, and strictly implement quality management process control in product production; Product line portfolio is rich, mainly including high temperature sealing, structural bonding, rubber bonding repair, industrial cleaning, anti card lubrication, hypoxia locking, sizing tools and other products.
Fill in your company information in the application form
We will contact you within 24 hours
After strict training, full-time engineers with rich practical experience and product knowledge do technical navigation.
Scan pays attention to us
Copyright © Shanghai Weineng New Material Technology Co., Ltd Corporation. All rights reserved. 沪ICP备14038124号
