Contact
Rust removal, rust prevention, dehumidification, lubrication, cleaning and other functions.
Packing specification: 350ml/ can
Gray, high adhesion, elastic, corrosion resistant, primer in paint finish; Suitable for corrosion protection of metal and concrete substrates under high corrosion conditions.
Packing specification: 1kg/ pot, 20L/ barrel
Colorless, solvent-based, colorless and tasteless as water, medium volatile, dissolved oil, degreasing, to dust;
Suitable for cleaning electronic and electrical equipment.
Packing specification: 20L/ drum
Red, resistant to chemical media, 204℃, solidified to form rigid gasket.
Packing specification: 50ml/300ml/ piece
Cast iron gray, suitable for filling and repairing iron castings and parts, can be machined.
Packing specification: 500g/1.5kg/ set
Fast penetration, loose rust and rust removal, with anti-rust lubrication.
Packing specification: 450ml/ can
It is labor-saving and light. It is specially used for injecting hydrogen sealant into the groove of the end cover of the turbine-generator.
Brown, two-component, flame retardant, quick curing at room temperature; It is suitable for the lap of the conveyor belt joint, the paste of the conveyor belt repair adhesive strip, and the paste of the rubber plate wrapped in the roller.
Packing specification: 1kg/ jar +60g/ bottle
Green, composite lithium base, temperature resistance -30-180℃, temperature resistance, extreme pressure, multi-purpose.
Packing specification: 1kg/ pot, 400g/ piece
Brown, heating curing, temperature resistance 685℃, pressure resistance 32.5MPa;
It is suitable for sealing the joint surface of low pressure cylinder of steam turbine.
Packing specification: 2.5kg/5kg/ can
Black, universal, tough soft film, thick coating, good ductility, self-healing after rubbing; Suitable for a variety of substrate preventive protection.
Packing specifications 1kg/ tank, 20L/ bucket
Colorless, solvent-based, low odor, non-flammable, insulating, non-conductive;
Suitable for maintenance and cleaning of power generation equipment.
Packing specification: 20kg/ barrel
Purplish red, universal type, solidified to form a flexible adhesive layer; Suitable for contact surface with expansion or vibration of the joint surface.
Packing specification: 50ml/300ml/ piece
Cast steel gray, suitable for steel castings and parts of the wear, scratch, corrosion, fracture repair, mechanical processing.
Packing specification: 500g/1.5kg/ set
Rapid volatilization, no residue, safe cleaning of metal surface oil stains.
Packing specification: 450ml/ can
Simple and compact structure, not easy to damage.
Yellow, single component, low viscosity, easy to brush, no wire; Suitable for adhesive between rubber and metal, wood and plastic.
Packing specification: 1L/ can
Blue, complex calcium sulfonate based, temperature resistant -25-200℃, temperature resistant, waterproof, long life.
Packing specification: 1kg/ pot, 400g/ piece
Brown, heating curing, temperature resistance 685℃, pressure resistance 32.5MPa;
It is suitable for sealing the joint surface of low pressure cylinder and medium pressure cylinder of steam turbine.
Packing specification: 2.5kg/5kg/ can
Black, acid and alkali resistance, heavy anticorrosive, tough hard film, stone resistance and sand resistance; Suitable for high corrosion conditions and severe sand hit metal surface protection.
Packing specification: 1kg/ pot, 57L/ barrel
Red, high viscosity, after curing for the flexible adhesive layer; Applicable to aluminum alloy surface and vibration, stress, temperature changes caused by displacement of the joint surface.
Packaging: 50ml/300ml/ piece
Aluminum silver, cemented, suitable for filling and repairing defects of aluminum and aluminum alloy castings.
Packing specification: 250g/ set
Quick volatilization without residue, no harm to plastics, wire board and components, suitable for safe cleaning of precision electronic instruments.
Packing specification: 450ml/ can
Hydraulic manual pump and gun body combined use, practical.
Black, two-component, curing at room temperature, high wear resistance, good toughness, no primer required; Suitable for conveyor belt damage repair, cable head perfusion sealing, rubber lining damage repair.
Packing specification: 100g/250g/300g/500g/ bag
Black, composite aluminum base, temperature resistance -20-160℃, heavy duty extreme pressure resistance, containing dry film lubricant.
Packing specification: 1kg/ pot, 400g/ piece
Brown, heating curing, temperature resistance 685℃, pressure resistance 32.5MPa;
It is suitable for sealing the cylinder joint surface of medium and high pressure cylinder of steam turbine.
Packing specification: 2.5kg/5kg/ can
Transparent beige color, flexible and high adhesion, salt spray resistance, moisture resistance, high temperature 200℃; Suitable for insulation protection of electrical equipment, circuit board and electronic components.
Packing specification: 1L/ pot, 20L/ barrel
Blue, universal, medium strength, removable; Suitable for all types of metal fasteners.
Packing specification: 50ml/250ml/ bottle
Gray, small particle wear resistant coating, temperature 150℃. Suitable for the reconstruction and repair of internal anticorrosive and wear-resistant coatings.
Packing specification: 2kg/ set
Power energy ®（ POWEROX ®） We have obtained iso9001:2015 quality management system certification, and strictly implement quality management process control in product production; Product line portfolio is rich, mainly including high temperature sealing, structural bonding, rubber bonding repair, industrial cleaning, anti card lubrication, hypoxia locking, sizing tools and other products.
Fill in your company information in the application form
We will contact you within 24 hours
After strict training, full-time engineers with rich practical experience and product knowledge do technical navigation.
Scan pays attention to us
Copyright © Shanghai Weineng New Material Technology Co., Ltd Corporation. All rights reserved. 沪ICP备14038124号
