Contact
Non-corrosive to metal, used to remove residual gaskets, rubber residue and oil dirt on flanges and equipment.
Packing specification: 450ml/ can
Black, two-component, thixotropic, no flow, normal temperature curing, wear resistance, convenient construction; It is suitable for repair of damaged conveyor belt, filling and sealing of cable head, and repair of damaged rubber lining.
Packing specification: 100g/250g/300g/500g/ bag
Red, composite lithium base, temperature -25-360℃, temperature resistant type.
Packing specification: 1kg/ pot, 400g/ piece
Brown, heating curing, temperature resistance 685℃, pressure resistance 32.5MPa;
It is suitable for sealing the cylinder joint surface of high pressure cylinder of large type steam turbine.
Packing specification: 2.5kg/5kg/ can
Pale white, transparent after dry, high permeability, can be applied to repel water vapor; Suitable for long-term rust protection of metal substrates.
Packing specification: 1L/ pot, 20L/ barrel
Blue, medium to high strength, thixotropic viscosity, good oil solubility, removable for common tools.
Packing specification: 50ml/250ml/ bottle
Gray, large particle wear resistant coating, temperature 150℃. Suitable for the reconstruction and repair of internal anticorrosive and wear-resistant coatings.
Packing specification: 2kg/ set
Colorless and tasteless, dissolve oil to remove stains, medium volatile, no residue. Suitable for cleaning electrical equipment.
Packing specification: 450ml/ can
Black, two-component, 1:1 ratio, fast solid and easy to operate, suitable for conveyor belt damage repair, cable head filling sealing, rubber lining damage repair.
Package size: 1Lb(906g)/ set
Black, composite lithium, containing molybdenum disulfide powder, temperature resistance -25-650℃, extreme pressure, impulse resistance, high temperature resistance.
Packing specification: 1kg/ pot, 400g/ piece
Brownish red, heating and curing, temperature resistance 610℃, pressure resistance 28.5MPa;
It is suitable for sealing the joint surface of the cylinder of small steam turbine below 200MW.
Packing specification: 2.5kg/ can
Brown, wear resistance and impact resistance; It is suitable for cavity protection of metal substrate surface and anti-bite of bolt thread at room temperature.
Packing specification: 1L/ pot, 20L/ barrel
Red, high strength, high oil resistance, impact resistance and fatigue resistance; Ordinary tools are removable.
Packing specification: 50ml/250ml/ bottle
Grey, temperature resistant 220℃, forming the compensation repair or pre-protection coating of the worn parts, suitable for pump, valve, shell and pipe abrasion repair.
Packing specification: 2kg/ set
High temperature resistance of 1315℃, suitable for high temperature bolt buckle bite resistance lubrication
Packing specification: 450ml/ can
Normal type, bottom surface containing semi-vulcanized CN layer, suitable for longitudinal tear of conveyor belt repair.
Width (mm) : 100, 150, 220, 300, 400
Length (m) : 10
White, hydrophobic, lubrication, sealing multiple functions, dedicated to the power station boiler slag dredge guide wheel waterproof lubrication.
Packing specification: 1kg/ can
Brownish red, heating and curing, temperature resistance 710℃, compression resistance 32.5MPa;
It is suitable for sealing the joint surface of the cylinder of steam turbine above 200MW.
Packing specification: 2.5kg/ can
The middle is reinforced with ribbons, and the bottom is semi-vulcanized CN layer, which is suitable for reinforcing the longitudinal tear of the conveyor belt.
Width (mm) : 100, 150, 220, 300, 400
Length (m) : 10
Creamy white, water-based coating, quick completion of penetration - passivation - rust transfer, blocking and shielding the occurrence of rust, combined with finishing paint, better anti-corrosion effect
Packing specification: 1kg/ can
Red, medium to low viscosity, high strength; It can be permanently locked.
Packing specification: 50ml/250ML/ bottle
Gray, clay shape, thick coating type;
Suitable for filling and repairing local corrosion parts, resistant to heavy corrosion of acid, alkali and salt.
Packing specification: 2kg/ set
Open lubrication can withstand high temperature of 650℃, oil film powder lubrication, anti-wear increase lubrication
Packing specification: 450ml/ can
Grey, ceramic based lubrication, extreme pressure wear resistance, temperature resistance 1315℃, prevent the thread buckle adhesion, sintering and rust death, make the disassembly more smooth.
Packing specification: 500g/1kg/ pot, 10kg/20kg/ barrel
Red brown, heating and curing, temperature resistance 910℃, compressive resistance 35MPa;
It is suitable for sealing the cylinder joint of 600MW supercritical super supercritical steam turbine.
Packing specification: 2.5kg/ can
Green, low viscosity, good penetration; Suitable for pre - installation with thread seal, metal weld, crack, micro - hole seal.
Packing specification: 50ml/ bottle
Blue, low viscosity, surface brushing type; Form a glazed protective layer, smooth, corrosion resistance, erosion resistance.
Packing specification: 1.5kg/ set
Open temperature resistance up to 260℃, acid, alkali and salt corrosion, PTFE dry film lubrication.
Packing specification: 450ml/ can
Gray, synthetic base oil, molybdenum base, temperature resistance 580℃, wet lubrication easier to disassemble.
Packing specification: 500g/1kg
Iron red, heating and curing, temperature 900℃, pressure 34MPa;
The sealing gap compensation ability is strong, suitable for all kinds of turbine equipment seal.
Packing specification: 1.25kg/ can
Power energy ®（ POWEROX ®） We have obtained iso9001:2015 quality management system certification, and strictly implement quality management process control in product production; Product line portfolio is rich, mainly including high temperature sealing, structural bonding, rubber bonding repair, industrial cleaning, anti card lubrication, hypoxia locking, sizing tools and other products.
Fill in your company information in the application form
We will contact you within 24 hours
After strict training, full-time engineers with rich practical experience and product knowledge do technical navigation.
Scan pays attention to us
Copyright © Shanghai Weineng New Material Technology Co., Ltd Corporation. All rights reserved. 沪ICP备14038124号
